Microwave Programming

MICROWAVE

• 1- 1 Sandwich
• 2- 2 Sandwiches
• 3-
• 4- Calibration
• 5- Kid’s Pancake
• 6-
• 7- BBQ Sauce
• 8-
• 9- Mac n cheese
• 0- Pancakes

Programming Amana and Panasonic Microwaves:

1	2	3	4	5	6	7	8	9	0
6 secs.	10 secs.		33 secs.	18 secs.		2 minutes		40 secs	30 secs.

PROGRAMMING AMANA MICROWAVES

Before programming the microwaves ensure there is a Cambro container with water inside the microwave. Failure to do so can result in microwave damage!

1. Open microwave door
2. Press & hold #1 timer button for approximately 5 seconds (the word PROGRAM will appear)
3. Select the button you are programming
4. Enter cooking time by using the number buttons
5. Hit START button to lock the time
6. Close the door
7. Test: Ensure there is a cambro container of water inside. Press the timer button to ensure the programming worked.

PROGRAMMING PANASONIC MICROWAVES

Before programming the microwaves ensure there is a Cambro container with water inside the microwave. Failure to do so can result in microwave damage!

For the Panasonic microwave you must ensure the microwave is the UNLOCK mode

1. Open microwave door
2. Press START & PROGRAM button for 2 seconds to unlock the microwave (PL= locked, P= unlocked)
3. Once the microwave is in the unlocked mode, ensure the microwave door is open & press the Program button. You will see the word PROGRAM flashing.
4. Select power level button
5. Select the button number you would like to program
6. Enter cooking time by using the number buttons
7. Press the Program button
8. Lock the microwave (Press START & PROGRAM button for 2 seconds to unlock the microwave) (PL= locked, P= unlocked)
9. Close the microwave door
10. Test: Ensure there is a cambro container of water inside. Press the timer button to ensure the programming worked.

Programming Amana OnCue Microwaves:

• 1- 1 Sandwich
• 2- 2 Sandwiches
• 3-
• 4- Calibration
• 5- Kid’s Pancake
• 6-
• 7- BBQ Sauce
• 8-
• 9- Mac n cheese
• 0- Pancakes

1	2	3	4	5	6	7	8	9	0
5 secs.	8 secs.		33 secs.	15 secs.		2 minutes		40 secs	20 secs.

PROGRAMMING ONCUE MICROWAVES

Before programming the microwaves ensure there is a Cambro container with water inside the microwave. Failure to do so can result in microwave damage!

1. Press and hold button 1 for approximately 5 seconds
2. Press the button number to be programmed
3. Enter cooking time by using the number buttons
4. Press the start button to set the new programming changes to the button
5. NOTE: To discard changes press stop button or close microwave door
6. Press stop button to exit programming mode
7. Test: Ensure there is a cambro container of water inside. Press the timer button to ensure the programming worked.