Jack's Docs

Skip to main content
Looking for help?
< All Topics
Print

Biscuit Timer Programming (Baked Chicken Test)

Updated

BISCUIT TIMER

  • 1 – Bake: 10 minutes
  • 2 – Bake: 10 minutes
  • 3 – Reheat (2nd bake feed 10 macaroni): 4 minutes
  • 4 – Reheat (2nd bake feed 10 macaroni): 4 minutes
  • 5 – Baked Chicken: 11 minutes
  • 6 – Feed 10/15/25 Macaroni: 8 minutes
  • 7 – Finish: 1 minute
  • 8 – Green Beans: 20 minutes

ALIGNMENT

  • Channels 1 and 2 are used when baking biscuits. Total cook time is 10 minutes.
  • Channels 3 and 4 will be used when reheating biscuits and for the 2nd bake of feeds 10 macaroni & cheese. Total re-heating or cook time is 4 minutes.
  • Channel 5 is used when baking chicken. Total cook time is 11 minutes. Oven Temp 375°F with fan set to LOW.
  • Channel 6 is used when baking feeds 10/15/25 macaroni & cheese (first bake) and for the 2nd bake of feeds 15/25 macaroni & cheese.
  • Channel 7 is used to finish cooking biscuits that have not reached the correct color after 10 minutes. Total finish time is 1 minute.
  • Channel 8 is used when cooking green beans. Total cook time is 20 minutes.

PROGRAMMING BISCUIT TIMER – ROUNDUP

  • 1. To program, press and hold the channel number you want to program for three seconds. The letters PGM will appear in the display area.
  • 2. When a TIME STAGE NAME flashes, use the up and down arrows to choose STAGE ONE, then press ENTER.
  • 3. Use the up and down buttons to set the desired time. To clear the time to 00:00:00, press and release the up and down arrows together.
  • Set your desired time to 26 minutes and 0 seconds. Press ENTER after each entry.
  • 4. Follow the same procedures to set CHANNEL 2-8. The timer will exit the program mode in 10 seconds if a button is not pressed.
  • 5. Press, then release CHANNEL 1 to start the countdown.
  • 6. All channels can be timing at the same time. The timer will display the time for the channel you last selected.
  • 7. The timer will sound twice per second for two minutes until the channel button is pressed.
  • 8. When one timing cycle is finished and the channel button is pressed, the display will show the next channel to finish.
  • IMPORTANT: Do not block the Solar Cells located at the top and front of the timer or it will not function properly.

PROGRAMMING BISCUIT TIMERS – PRINCE CASTLE

  • 1. To program, press and hold the PRINCE CASTLE LOGO for eight seconds until a beep sounds and the display reads SEL CH / LOGO = QUIT.
  • 2. Select and press TIMER 1. The LED indicator will turn yellow and the display will read CKT=COOK TIME.
  • 3. Using the SCAN/UP or SCAN/DOWN arrows, set the time at 6:00 minutes. Press the ENTER button to store.
  • To change between Minutes/Seconds (M:S) and Hours/Minutes (H:M), press and hold the SCAN/UP button.
  • 4. When the display switches to CKC=MAN CANCEL, select manual (MAN) or automatic (AUT) alarm cancel using the arrows. Press ENTER.
  • IMPORTANT: Always select manual cancel so the beeping requires a manual stop.
  • 5. When the display changes to CKL=REMOVE, use arrows to scroll to SIDE 2 and press ENTER.
  • 6. To set the DUTY time, press CHANNEL BUTTON 1 once. The display will read D1T=DUTY 1 TIME.
  • 7. Using the arrows, set the duty time at 3:00 minutes and press ENTER.
  • 8. Press CHANNEL BUTTON 1 again and use arrows to select MAN Cancel, then press ENTER.
  • 9. Press CHANNEL BUTTON 1 again and use arrows to select “TURN” from the function names, then press ENTER.
  • 10. Continue pressing CHANNEL BUTTON 1 to set duty 2-time, duty 3-time, hold time, and hold alarm time, pressing ENTER after each.
  • 11. Complete these steps for CHANNEL BUTTONS 2-8.
  • 12. Press the PRINCE CASTLE LOGO to exit programming mode.

VOLUME ADJUSTMENT

  • In RUN MODE, press and hold the PRINCE CASTLE LOGO.
  • Within six seconds, press the SCAN UP Arrow for a louder alarm or the SCAN DOWN Arrow for a lower alarm.
Table of Contents